1:00
Click the first and last characters of the items you find.
en
WO
The Super Belt (Belt Finishing Sander)
12
adjust: _____ the table to within 1/16" of the abrasive belt.
tension: Make sure there is adequate strong ____.
surface: Move the stock evenly and steadily over abrasive of the sander.
torn: Make sure the belt is not ____.
tracking: Make all adjustments except final belt tracking with the power off.
flat: Keep hands clear of the abrasive belt while operating and keep the material ____ on the table.
objects: Machine sand only _______ large enough to hold safely against the belt.
arrows: When changing belts, make sure the new belt runs as the _____ indicates.
down: Sand on the ______ stroke of the belt sander.
safety rules: Follow all ______ when working in the shop.
eye protection: Proper______ must be worn when operating the belt finishing sander.
instructors: Operate the machines only with the _______permission.
The Super Belt (Belt Finishing Sander)
D | B | F | C | T | W | U | C | I | G | U | U | K | L | E | A |
W | K | T | T | T | X | F | Q | A | D | O | W | N | K | Y | H |
A | E | F | L | I | A | L | O | V | L | A | O | G | W | E | E |
E | S | A | F | E | T | Y | R | U | L | E | S | G | Q | P | M |
O | J | F | Q | U | G | B | U | P | K | D | T | I | B | R | H |
Z | A | A | C | H | S | J | C | D | W | B | R | N | S | O | Y |
C | D | D | A | R | R | O | W | S | L | C | A | S | S | T | O |
S | B | T | J | D | T | K | G | Y | X | C | C | T | W | E | B |
H | U | O | F | U | G | N | F | U | Z | Y | K | R | T | C | J |
N | P | R | Q | L | S | W | P | U | C | M | I | U | E | T | E |
X | K | N | F | J | A | T | Y | C | U | M | N | C | N | I | C |
E | Q | Q | D | A | W | T | E | H | Q | T | G | T | S | O | T |
F | Q | E | X | K | C | W | O | X | S | L | Q | O | I | N | S |
R | C | C | S | V | D | E | C | L | K | T | B | R | O | E | C |
J | E | Y | K | G | N | Q | F | I | I | L | A | S | N | F | J |
U | K | X | K | Y | S | F | G | B | W | A | P | V | H | U | S |
- _____ the table to within 1/16" of the abrasive belt.
- Make sure there is adequate strong ____.
- Move the stock evenly and steadily over abrasive of the sander.
- Make sure the belt is not ____.
- Make all adjustments except final belt tracking with the power off.
- Keep hands clear of the abrasive belt while operating and keep the material ____ on the table.
| - Machine sand only _______ large enough to hold safely against the belt.
- When changing belts, make sure the new belt runs as the _____ indicates.
- Sand on the ______ stroke of the belt sander.
- Follow all ______ when working in the shop.
- Proper______ must be worn when operating the belt finishing sander.
- Operate the machines only with the _______permission.
|
© 2013
PuzzleFast.com, Noncommercial Use Only
The Super Belt (Belt Finishing Sander)
D | B | F | C | T | W | U | C | I | G | U | U | K | L | E | A |
W | K | T | T | T | X | F | Q | A | D | O | W | N | K | Y | H |
A | E | F | L | I | A | L | O | V | L | A | O | G | W | E | E |
E | S | A | F | E | T | Y | R | U | L | E | S | G | Q | P | M |
O | J | F | Q | U | G | B | U | P | K | D | T | I | B | R | H |
Z | A | A | C | H | S | J | C | D | W | B | R | N | S | O | Y |
C | D | D | A | R | R | O | W | S | L | C | A | S | S | T | O |
S | B | T | J | D | T | K | G | Y | X | C | C | T | W | E | B |
H | U | O | F | U | G | N | F | U | Z | Y | K | R | T | C | J |
N | P | R | Q | L | S | W | P | U | C | M | I | U | E | T | E |
X | K | N | F | J | A | T | Y | C | U | M | N | C | N | I | C |
E | Q | Q | D | A | W | T | E | H | Q | T | G | T | S | O | T |
F | Q | E | X | K | C | W | O | X | S | L | Q | O | I | N | S |
R | C | C | S | V | D | E | C | L | K | T | B | R | O | E | C |
J | E | Y | K | G | N | Q | F | I | I | L | A | S | N | F | J |
U | K | X | K | Y | S | F | G | B | W | A | P | V | H | U | S |
- ADJUST
- TENSION
- SURFACE
- TORN
- TRACKING
- FLAT
| - OBJECTS
- ARROWS
- DOWN
- SAFETYRULES
- EYEPROTECTION
- INSTRUCTORS
|
© 2013
PuzzleFast.com, Noncommercial Use Only