1:00
en
FI
SAFETY PUZZLE 09
8
Maintenance : 1) Risks for injury are generally related to hand tool misuse or improper tool ___________
Protection : 2) Always wear eye __________ when using a hand saw.
Firmly : 3) When cutting, hold the workpiece ______ and feed it smoothly at a moderate speed.
Leak : 4) Laboratory hazardous waste containers shall not be opened or handled in a manner which may rupture the container or cause it to ____.
Stopped : 5) Cleaning must only be done on a machine when it has fully _______.
Securely : 6) Use a clamp or vise to ________ fasten the stock to the drill press table.
Flammable : 7) Store _________ liquids, such as gasoline and solvents, in approved safety cans/cabinets.
Unauthorised : 8) Do not operate the machines unless you are ____________ to do so by the instructor or the supervisor.
Respirator : 9)A __________ that covers the mouth and nose should be used to prevent pesticide exposure through inhalation.
Damaged : 10) _______ tools shall be reported to the supervisor and taken out of service._______ and the lathe bed.
SAFETY PUZZLE 09
- 10) _______ tools shall be reported to the supervisor and taken out of service._______ and the lathe bed.
- 7) Store _________ liquids, such as gasoline and solvents, in approved safety cans/cabinets.
- 4) Laboratory hazardous waste containers shall not be opened or handled in a manner which may rupture the container or cause it to ____.
| - 1) Risks for injury are generally related to hand tool misuse or improper tool ___________
- 2) Always wear eye __________ when using a hand saw.
- 9)A __________ that covers the mouth and nose should be used to prevent pesticide exposure through inhalation.
| - 6) Use a clamp or vise to ________ fasten the stock to the drill press table.
- 5) Cleaning must only be done on a machine when it has fully _______.
|
© 2013
PuzzleFast.com, Noncommercial Use Only
SAFETY PUZZLE 09
| - MAINTENANCE
- PROTECTION
- RESPIRATOR
| |
© 2013
PuzzleFast.com, Noncommercial Use Only