1:00
en
CR
§ IED VOCABULARY §
31
Acute Triangle : A triangle that contains only angles that are less than 90 degrees.
Angle : The amount of rotation needed to bring one line or plane into coincidence with another, generally measured in radians or degrees.
Area : The number of square units required to cover a surface.
Axis : An imaginary line through a body, about which it rotates. 2. An imaginary line about which a regular figure is symmetrically arranged. 3. A fixed reference line for the measurement of coordinates.
Center of Gravity : A 3D point where the total weight of the body may be considered to be concentrated.
Centroid : A 3D point defining the geometric center of a solid.
Circle : A round plane figure whose boundary consists of points equidistant from the center
Circumscribe : A triangle located round a polygon such as a circle. 2 To draw a figure around another, touching it at points but not cutting it.
Cylinder : A solid composed of two congruent circles in parallel planes, their interiors, and all the line segments parallel to the axis with endpoints on the two circles.
Density : The measure of mass density is a measure of mass per volume.
Diameter : A straight line passing from side to side through the center of a circle or sphere.
Ellipse : A shape generated by a point moving in a plane so that the sum of its distances from two other points (the foci) is constant and equal to the major axis
Fillet : A curve formed at the interior intersection between two or more surfaces.
Inscribe : To draw a figure within another so that their boundaries touch but do not intersect.
Mass : The amount of matter in an object or the quantity of the inertia of the object.
Meniscus : The curved upper surface of a liquid column that is concave when the containing walls are wetted by the liquid and convex when not.
Obtuse Triangle : A triangle with one angle that is greater than 90 degrees.
Parallelogram : A four-sided polygon with both pairs of opposite sides parallel.
Pi : The numerical value of the ratio of the circumference of a circle to its diameter of approximately 3.14159.
Polygon : Any plane figure bounded by straight lines.
Principal Axes : The lines of intersection created from three mutually perpendicular planes, with the three planes’ point of intersection at the centroid of the part.
Prism : A solid geometric figure whose two ends are similar, equal, and parallel rectilinear figures, and whose sides are parallelograms.
Quadrilateral : A four-sided polygon.
Radius : A straight line from the center to the circumference of a circle or sphere.
Rectangle : A parallelogram with 90 degree angles. A square is also a rectangle.
Regular Polygon : A polygon with equal angles and equal sides.
Right Triangle : A triangle that has a 90 degree angle.
Round : Two or more exterior surfaces rounded at their intersections.
Square : A regular polygon with four equal sides and four 90 degree angles.
Surface Area : The squared dimensions of the exterior surface
Tangent : A straight or curved line that intersects a circle or arc at one point only.
Title Block : A table located in the bottom right-hand corner of an engineering drawing that identifies, in an organized way, all of the necessary information that is not given on the drawing itself. Also referred to as a title strip.
Triangle : A polygon with three sides.
Vertex : Each angular point of a polygon, polyhedron, or other figure.
Volume : The amount of three-dimensional space occupied by an object or enclosed within a container.
Quadrilateral : A four-sided polygon.
§ IED VOCABULARY §
Across:3. | The number of square units required to cover a surface. | 4. | A parallelogram with 90 degree angles. A square is also a rectangle. | 6. | A curve formed at the interior intersection between two or more surfaces. | 8. | A round plane figure whose boundary consists of points equidistant from the center | 9. | The amount of matter in an object or the quantity of the inertia of the object. | 12. | The lines of intersection created from three mutually perpendicular planes, with the three planes’ point of intersection at the centroid of the part. | 14. | A triangle with one angle that is greater than 90 degrees. | 16. | The squared dimensions of the exterior surface | 18. | A straight line from the center to the circumference of a circle or sphere. |
| 19. | A polygon with three sides. | 20. | A triangle that contains only angles that are less than 90 degrees. | 21. | Two or more exterior surfaces rounded at their intersections. | 22. | A 3D point defining the geometric center of a solid. | 23. | A table located in the bottom right-hand corner of an engineering drawing that identifies, in an organized way, all of the necessary information that is not given on the drawing itself. Also referred to as a title strip. | 27. | A polygon with equal angles and equal sides. | 28. | A shape generated by a point moving in a plane so that the sum of its distances from two other points (the foci) is constant and equal to the major axis | 29. | A triangle that has a 90 degree angle. |
| | Down:1. | A straight line passing from side to side through the center of a circle or sphere. | 2. | The curved upper surface of a liquid column that is concave when the containing walls are wetted by the liquid and convex when not. | 5. | Any plane figure bounded by straight lines. | 7. | To draw a figure within another so that their boundaries touch but do not intersect. | 8. | A solid composed of two congruent circles in parallel planes, their interiors, and all the line segments parallel to the axis with endpoints on the two circles. | 10. | An imaginary line through a body, about which it rotates. 2. An imaginary line about which a regular figure is symmetrically arranged. 3. A fixed reference line for the measurement of coordinates. | 11. | A four-sided polygon. |
| 13. | A regular polygon with four equal sides and four 90 degree angles. | 15. | A four-sided polygon. | 17. | The numerical value of the ratio of the circumference of a circle to its diameter of approximately 3.14159. | 23. | A straight or curved line that intersects a circle or arc at one point only. | 24. | Each angular point of a polygon, polyhedron, or other figure. | 25. | The measure of mass density is a measure of mass per volume. | 26. | The amount of rotation needed to bring one line or plane into coincidence with another, generally measured in radians or degrees. |
| |
© 2015
PuzzleFast.com, Noncommercial Use Only
§ IED VOCABULARY §
Across:3. | The number of square units required to cover a surface. | 4. | A parallelogram with 90 degree angles. A square is also a rectangle. | 6. | A curve formed at the interior intersection between two or more surfaces. | 8. | A round plane figure whose boundary consists of points equidistant from the center | 9. | The amount of matter in an object or the quantity of the inertia of the object. | 12. | The lines of intersection created from three mutually perpendicular planes, with the three planes’ point of intersection at the centroid of the part. | 14. | A triangle with one angle that is greater than 90 degrees. | 16. | The squared dimensions of the exterior surface | 18. | A straight line from the center to the circumference of a circle or sphere. |
| 19. | A polygon with three sides. | 20. | A triangle that contains only angles that are less than 90 degrees. | 21. | Two or more exterior surfaces rounded at their intersections. | 22. | A 3D point defining the geometric center of a solid. | 23. | A table located in the bottom right-hand corner of an engineering drawing that identifies, in an organized way, all of the necessary information that is not given on the drawing itself. Also referred to as a title strip. | 27. | A polygon with equal angles and equal sides. | 28. | A shape generated by a point moving in a plane so that the sum of its distances from two other points (the foci) is constant and equal to the major axis | 29. | A triangle that has a 90 degree angle. |
| | Down:1. | A straight line passing from side to side through the center of a circle or sphere. | 2. | The curved upper surface of a liquid column that is concave when the containing walls are wetted by the liquid and convex when not. | 5. | Any plane figure bounded by straight lines. | 7. | To draw a figure within another so that their boundaries touch but do not intersect. | 8. | A solid composed of two congruent circles in parallel planes, their interiors, and all the line segments parallel to the axis with endpoints on the two circles. | 10. | An imaginary line through a body, about which it rotates. 2. An imaginary line about which a regular figure is symmetrically arranged. 3. A fixed reference line for the measurement of coordinates. | 11. | A four-sided polygon. |
| 13. | A regular polygon with four equal sides and four 90 degree angles. | 15. | A four-sided polygon. | 17. | The numerical value of the ratio of the circumference of a circle to its diameter of approximately 3.14159. | 23. | A straight or curved line that intersects a circle or arc at one point only. | 24. | Each angular point of a polygon, polyhedron, or other figure. | 25. | The measure of mass density is a measure of mass per volume. | 26. | The amount of rotation needed to bring one line or plane into coincidence with another, generally measured in radians or degrees. |
| |
© 2015
PuzzleFast.com, Noncommercial Use Only