1:00
en
FI
SAFETY PUZZLE 08
10
Damage : 1) Prior to use, inspect power tool for ______ or disrepair.
Clamped : 2) Before starting, determine that the work piece is properly centered and securely _______ in the chuck.
Rubber soled : 3) Always wear a welding hood with safety glasses, fire-resistant gauntlet gloves, ____________ shoes, leather apron, and appropriate protective clothing (non-synthetic fiber) when using arc-welding equipment .
Spilled : 4) _______ material can be prevented from spreading by covering with absorbent pads or dry powder absorbent.
Respirator : 5) A __________ or mask must be used when there is danger of inhaling minute particles while working with air borne substances.
Cap : 6) When operating a machine, tie long hair back or secure under a ___.
Disconnect : 7) Turn off shop tools or equipment and __________ power sources prior to cleaning or performing repairs, service, and adjustments.
Moving : 8) Do not wear rings, watches, bracelets or other jewellery that may get caught in ______ machineries.
Pesticides : 9)Respiratory protection is important because __________ can enter the bloodstream rapidly and fully through the lungs.
Fingers : 10) Boards shall be laid across the ways of the lathe when changing chucks to protect _______ and the lathe bed.
SAFETY PUZZLE 08
- 1) Prior to use, inspect power tool for ______ or disrepair.
- 6) When operating a machine, tie long hair back or secure under a ___.
- 8) Do not wear rings, watches, bracelets or other jewellery that may get caught in ______ machineries.
- 2) Before starting, determine that the work piece is properly centered and securely _______ in the chuck.
- 4) _______ material can be prevented from spreading by covering with absorbent pads or dry powder absorbent.
| - 10) Boards shall be laid across the ways of the lathe when changing chucks to protect _______ and the lathe bed.
- 9)Respiratory protection is important because __________ can enter the bloodstream rapidly and fully through the lungs.
- 5) A __________ or mask must be used when there is danger of inhaling minute particles while working with air borne substances.
- 7) Turn off shop tools or equipment and __________ power sources prior to cleaning or performing repairs, service, and adjustments.
- 3) Always wear a welding hood with safety glasses, fire-resistant gauntlet gloves, ____________ shoes, leather apron, and appropriate protective clothing (non-synthetic fiber) when using arc-welding equipment .
|
© 2013
PuzzleFast.com, Noncommercial Use Only
SAFETY PUZZLE 08
- DAMAGE
- CAP
- MOVING
- CLAMPED
- SPILLED
| - FINGERS
- PESTICIDES
- RESPIRATOR
- DISCONNECT
- RUBBERSOLED
|
© 2013
PuzzleFast.com, Noncommercial Use Only