enFISAFETY PUZZLE 0810
Damage : 1) Prior to use, inspect power tool for ______ or disrepair.
Clamped : 2) Before starting, determine that the work piece is properly centered and securely _______ in the chuck.
Rubber soled : 3) Always wear a welding hood with safety glasses, fire-resistant gauntlet gloves, ____________ shoes, leather apron, and appropriate protective clothing (non-synthetic fiber) when using arc-welding equipment .
Spilled : 4) _______ material can be prevented from spreading by covering with absorbent pads or dry powder absorbent.
Respirator : 5) A __________ or mask must be used when there is danger of inhaling minute particles while working with air borne substances.
Cap : 6) When operating a machine, tie long hair back or secure under a ___.
Disconnect : 7) Turn off shop tools or equipment and __________ power sources prior to cleaning or performing repairs, service, and adjustments.
Moving : 8) Do not wear rings, watches, bracelets or other jewellery that may get caught in ______ machineries.
Pesticides : 9)Respiratory protection is important because __________ can enter the bloodstream rapidly and fully through the lungs.
Fingers : 10) Boards shall be laid across the ways of the lathe when changing chucks to protect _______ and the lathe bed.
SAFETY PUZZLE 08
E
O
A
1) Prior to use, inspect power tool for ______ or disrepair.
6) When operating a machine, tie long hair back or secure under a ___.
8) Do not wear rings, watches, bracelets or other jewellery that may get caught in ______ machineries.
2) Before starting, determine that the work piece is properly centered and securely _______ in the chuck.
4) _______ material can be prevented from spreading by covering with absorbent pads or dry powder absorbent.
10) Boards shall be laid across the ways of the lathe when changing chucks to protect _______ and the lathe bed.
9)Respiratory protection is important because __________ can enter the bloodstream rapidly and fully through the lungs.
5) A __________ or mask must be used when there is danger of inhaling minute particles while working with air borne substances.
7) Turn off shop tools or equipment and __________ power sources prior to cleaning or performing repairs, service, and adjustments.
3) Always wear a welding hood with safety glasses, fire-resistant gauntlet gloves, ____________ shoes, leather apron, and appropriate protective clothing (non-synthetic fiber) when using arc-welding equipment .